Week 10
- We started to build our boxes. We are using both Butt Joints and Miter joints to test how each one looks and how to put together. we are using 3.2 drill bits and self taping screws. We are pre-drilling the holes so that its easier to drill and so the box is also square. We glued the miter joints together and Bogged the holes.
Problem In-counted: Two holes on one side of the box splinted because i didn't drill deep enough before placing in screws.
Problem Solved: The teacher told me to drill two new holes next to the previous ones and bog the old holes.
Next Steps: Sand down the bog so that its flush with the box.
No comments:
Post a Comment